Tariffkit

ECCN

Not legal advice. Tariffkit is a free research tool. It quotes HTS rate text and ECCN control text as published by the official sources linked here. It does not classify an item, does not apply rulings, and does not calculate duty. Verify the cited release with those sources and with counsel before you rely on it.

9B106

9B106 Environmental chambers usable for rockets, missiles, or unmanned aerial vehicles capable of achieving a “range” equal to or greater than 300 km and their subsystems, as follows (see List of Items Controlled).

Category
Category 9—Aerospace and Propulsion
Product group
B. “Test”, “Inspection” and “Production Equipment”

Reason for Control

  • MT
  • AT

Official text

License Requirements

Reason for Control:

MT, AT

Control(s) Country Chart (See Supp. No. 1 to part 738)

  • MT applies to entire entry MT Column 1
  • AT applies to entire entry AT Column 1

List Based License Exceptions (See Part 740 for a description of all license exceptions)

LVS: N/A

GBS: N/A

List of Items Controlled

Related Controls: N/A

Related Definitions: N/A

Items: a. Environmental chambers having all of the following characteristics:

a.1. Capable of simulating any of the following flight conditions:

a.1.a. Altitude equal to or greater than 15,000 m; or

a.1.b. Temperature range from below −50 °C to above 125 °C; and

a.2. Incorporating, or designed or modified to incorporate, a shaker unit or other vibration test equipment to produce vibration environments equal to or greater than 10 g rms, measured 'bare table,' between 20 Hz and 2 kHz while imparting forces equal to or greater than 5 kN;

Technical Notes:

1. Item 9B106.a.2 describes systems that are capable of generating a vibration environment with a single wave (e.g., a sine wave) and systems capable of generating a broad band random vibration (i.e., power spectrum).

2. The term ‘bare table’ means a flat table, or surface, with no fixture or fittings.

3. In Item 9B106.a.2, designed or modified means the environmental chamber provides appropriate interfaces (e.g., sealing devices) to incorporate a shaker unit or other vibration test equipment as specified in this Item.

b. Environmental chambers capable of simulating all of the following flight conditions:

b.1. Acoustic environments at an overall sound pressure level of 140 dB or greater (referenced to 2 × 10−5 N/m 2) or with a total rated acoustic power output of 4kW or greater; and

b.2. Any of the following:

b.2.a. Altitude equal to or greater than 15,000 m; or

b.2.b. Temperature range of at least −50 °C to + 125 °C.

ecfr-15cfr774-supp1-2026-08-28 · effective 2026-08-28

Issue date 2026-08-28. Amendment date 2026-08-28.

This page quotes the loaded release. A shareable report freezes this text.

Back to search

Was this helpful?

A short note about this page. Not shown on the site.

Free research lookup of official HTS and ECCN text.

Keep me posted on new data

Optional email when the official files or this lookup change. Search stays free.